NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
Talk:AM335x Industrial Automation EVM User Guide
Comments on AM335x Industrial Automation EVM User Guide
Rbornet said ...
Gtominovich said ...
The document has been updated with the IDK block diagrams and images.
--Gtominovich 17:37, 22 June 2012 (CDT)
Bat vladi said ...
Hello, I noticed a error in the scheme "Base board" NAND Flash library file ("U9" - MT29F2G08AB) that is used in the scheme is wrong. He did not pin to pin compatible with footprin given by manufacturer, and so connected in x16 mode is wrong. For example: 46-pin by schematic should not be "I/O 14" in x16 mode, must be "I/O 7". And so on....
Greetings from your fan eng.Vladimir Zlatev
--bat_vladi 02:20, 6 November 2012 (CST)
Bat vladi said ...
In addition to the previous note: However, I found that using the Footprint will be true for NAND Flash memory x8 x16 with density 8 Gb(1G Byte)for example:MT29F8G08AB, or MT29F8G16AB.
But anyway, I think, that they have no place here. Because the maximum address space that "Sitara" can generate to a one memory chip is a 512 MByte (4Gb).
Best regards eng. Vladimir Zlatev
--bat_vladi 03:08, 6 November 2012 (CST)
The block diagram for the IDK daughterboard in section 3.1.2, Figure 5, is wrong. It shows the block diagram and peripherals of the GP daughterboard, not the ones of the IDK.
--Rbornet 11:02, 21 March 2012 (CDT)