NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
OMAP and Sitara CCS support
Introduction[edit]
This page contains the GEL and CCS configuration files for all OMAP and Sitara devices. This page still needs to be completed, but will contain files for OMAP35x, AM35x, AM37x, and DM37x devices. Eventually, these will be part of the general CCS package, but until then, they will reside here.
CCS 3.3 support files[edit]
OMAP3530 and OMAP3525[edit]
GEL Files[edit]
Configuration files[edit]
OMAP3503 and OMAP3515[edit]
GEL Files[edit]
GELs for OMAP35x EVM (These are the same GEL files as above for OMAP3530/25, but the DSP specific scripts will not function on OMAP3503/15).
Configuration files[edit]
DM3730 and DM3725[edit]
GEL Files[edit]
Configuration files[edit]
AM3703 and AM3715[edit]
GEL Files[edit]
Configuration files[edit]
CCS 4.x and 5.x support files[edit]
OMAP3530 and OMAP3525[edit]
GEL Files[edit]
GELs for OMAP3EVM for CCSv4 and CCSv5
DM3730 and DM3725[edit]
GEL Files[edit]
GELs for OMAP3EVM with DM3730 for CCSv4 and CCSv5
Configuration files[edit]
DM8148[edit]
GEL Files[edit]
GEL for DM8148 EVM baseboard
The package Diagnostics Software of the DM8148EVM support page at Mistral Solutions has additional GEL files for the EVM and peripheral boards.
DM8168[edit]
GEL Files[edit]
Gel files for all variants of this board are available at the Spectrum Digital's support page.
AM335x[edit]
GEL Files[edit]
Beaglebone GEL
File:AM335x 13x13 EVM v1 0.zip
File:AM335x 15x15 EVM v1 2.zip
File:AM335x 15x15 EVM v1 3.zip
File:AM335x 15x15 EVM v1 5.zip
File:AM3358 StarterKit.zip
File:TMDXICE3359.zip
File:TMDXICE3359 v2 1A.zip
AM437x[edit]
GEL Files[edit]
This GEL file package for AM437x GP, IDK and Starter Kit EVM includes the following files:
- AM437x_MMR.gel: Collection of defines for Memory Mapped Registers. Not an exhaustive list, but includes all registers used by other files
- AM437x_Status: Various functions to decode status registers, enabled CLKOUT signals, and reading PLL configurations
- AM43xx_PLLconfig: Functions to configure the device PLLs. Only OPP100 is configured since changing OPPs requires voltage changes (voltage changes not supported in GELs)
- AM43xx_EMIFconfig_HWlvl.gel: Functions to configure DDR3 or LPDDR2 memories. Configurations are specific to EVMs. Certain values will need to change for custom boards.
- AM437x_EVMs.gel: Modify this to create a new board if needed.
- evmam437x.gel: AM437x GP EVM Top level GEL which calls the other files.
- idk_am437x.gel: AM437x IDK EVM Top level GEL which calls the other files.
- sk_am437x.gel: AM437x Starter Kit EVM Top level GEL which calls the other files.
Currently, these GELs support GP EVM v1.5A, IDK EVM v1.3A and Starter kit EVM v1.1A