NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
OMAP35xx DVSDK WinCE 100 Getting Started Guide
This Getting Started Guide (GSG) walks you through the steps of setting up the OMAP35x EVM and installing the OMAP35xx WinCE DVSDK software. You should proceed through this guide in the order listed on this page for best results. By the end of this Getting Started Guide you will have the OMAP35x EVM booting to WinCE 6.0 R2 and the WinCE host development environment configured. You should also bookmark the WinCE category since new articles will continue to appear in that list.
If you are reading this GSG as a file please check http://wiki.davincidsp.com/index.php/OMAP35xx_DVSDK_WinCE_100_Getting_Started_Guide for the latest updates.
DVSDK overview[edit]
GSG: OMAP35xx WinCE DVSDK Overview provides an overview of the OMAP35xx WinCE DVSDK.
Hardware setup[edit]
GSG: OMAP35xx WinCE DVSDK Hardware Setup provides information on setting up the OMAP35xx WinCE DVEVM hardware.
Software setup[edit]
GSG: OMAP35xx WinCE DVSDK Software Setup (new) covers how to install the software required to use the OMAP35xx WinCE DVSDK (for DVSDK 1.00.00.05 and later). If you are using DVSDK 1.00.00.04, see the old software setup page instead.
Running demos[edit]
GSG: OMAP35xx WinCE DVSDK Running the Demos describes how to set up, execute, and shut down the demos.
|
{{
Please post only comments related to the article OMAP35xx DVSDK WinCE 100 Getting Started Guide here. |
Keystone=
Please post only comments related to the article OMAP35xx DVSDK WinCE 100 Getting Started Guide here. |
C2000=For technical support on the C2000 please post your questions on The C2000 Forum. Please post only comments about the article OMAP35xx DVSDK WinCE 100 Getting Started Guide here. | DaVinci=For technical support on DaVincoplease post your questions on The DaVinci Forum. Please post only comments about the article OMAP35xx DVSDK WinCE 100 Getting Started Guide here. | MSP430=For technical support on MSP430 please post your questions on The MSP430 Forum. Please post only comments about the article OMAP35xx DVSDK WinCE 100 Getting Started Guide here. | OMAP35x=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article OMAP35xx DVSDK WinCE 100 Getting Started Guide here. | OMAPL1=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article OMAP35xx DVSDK WinCE 100 Getting Started Guide here. | MAVRK=For technical support on MAVRK please post your questions on The MAVRK Toolbox Forum. Please post only comments about the article OMAP35xx DVSDK WinCE 100 Getting Started Guide here. | For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article OMAP35xx DVSDK WinCE 100 Getting Started Guide here.
}} |
