NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
GSG: OMAP35xx WinCE DVSDK Hardware Setup
^ Up to main OMAP35xx WinCE DVSDK Getting Started Guide Table of Contents
This topic tells you how to set up the OMAP 35x EVM hardware.
Obtaining the EVM hardware[edit]
DVSDK WinCE 100 has been developed and tested on the OMAP35xx EVM (TMDXEVM3503 and TMDSEVM3530)devloped by Mistral Solutions Inc. You can order the OMAP35x EVM directly from Mistral Solutions Inc. by visiting http://www.mistralsolutions.com/products/omap_3evm.php. The datasheet for this EVM is available here.
Important Note: The OMAP35x EVM kit comes with a Linux-based DVSDK and software getting started instructions. Please ignore the software setup instructions that come with the OMAP35x EVM from Mistral Solutions. Instead, follow these wiki-based instructions for the WinCE-based version of the DVSDK.
Setting up the EVM hardware[edit]
To set up the hardware provided with the DVEVM kit, use the hardware setup steps provided with the OMAP35x EVM from Mistral Solutions Inc. You may skip steps if you do not need to access a particular peripheral. For example, if you do not need to use the serial cable, skip that step.
Caution: The EVM board is sensitive to static discharges. Use a grounding strap or other device to prevent damaging the board. Be sure to connect communication cables before applying power to any equipment.
What next?[edit]
The next chapter of this Getting Started Guide is GSG: OMAP35xx WinCE DVSDK Software Setup.
|
{{
Please post only comments related to the article GSG: OMAP35xx WinCE DVSDK Hardware Setup here. |
Keystone=
Please post only comments related to the article GSG: OMAP35xx WinCE DVSDK Hardware Setup here. |
C2000=For technical support on the C2000 please post your questions on The C2000 Forum. Please post only comments about the article GSG: OMAP35xx WinCE DVSDK Hardware Setup here. | DaVinci=For technical support on DaVincoplease post your questions on The DaVinci Forum. Please post only comments about the article GSG: OMAP35xx WinCE DVSDK Hardware Setup here. | MSP430=For technical support on MSP430 please post your questions on The MSP430 Forum. Please post only comments about the article GSG: OMAP35xx WinCE DVSDK Hardware Setup here. | OMAP35x=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article GSG: OMAP35xx WinCE DVSDK Hardware Setup here. | OMAPL1=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article GSG: OMAP35xx WinCE DVSDK Hardware Setup here. | MAVRK=For technical support on MAVRK please post your questions on The MAVRK Toolbox Forum. Please post only comments about the article GSG: OMAP35xx WinCE DVSDK Hardware Setup here. | For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article GSG: OMAP35xx WinCE DVSDK Hardware Setup here.
}} |
