NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
WiLink8 Feature Guide/AP P2P
 Supported from version ol_r8.a9.21 (R8.5) and above
|
Feature Description[edit]
- AP can work concurrent with P2P GO on the same channel.
Note: The channel synchronization is done automatically as long as no explicit channel is set when performing the P2P connection.
Setting the P2P-GO channel explicitly after the AP is already running of different channel will result in P2P connection failure.
- AP can work concurrent with P2P Client on same/different channel.
Setup & Configuration[edit]
No need for special configuration.
User Guide & Examples[edit]
For loading and unloading the AP role use "ap_start.sh" and "ap_stop" scripts correspondingly.
For loading and unloading the P2P role use "p2p_start.sh and "p2p_stop" scripts correspondingly.
Note: When using p2p_start.sh in a single role scenario, there is a current consumption impact, please use "sta_start.sh" and "sta_stop.sh" scripts for single role scenarios.
Errata/Limitations[edit]
AP cannot be loaded on a DFS channel when working concurrently with P2P GO (Radar detection mechanism is implemented in hostapd and not in wpa_supplicant).
|
{{
Please post only comments related to the article WiLink8 Feature Guide/AP P2P here. |
Keystone=
Please post only comments related to the article WiLink8 Feature Guide/AP P2P here. |
C2000=For technical support on the C2000 please post your questions on The C2000 Forum. Please post only comments about the article WiLink8 Feature Guide/AP P2P here. | DaVinci=For technical support on DaVincoplease post your questions on The DaVinci Forum. Please post only comments about the article WiLink8 Feature Guide/AP P2P here. | MSP430=For technical support on MSP430 please post your questions on The MSP430 Forum. Please post only comments about the article WiLink8 Feature Guide/AP P2P here. | OMAP35x=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article WiLink8 Feature Guide/AP P2P here. | OMAPL1=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article WiLink8 Feature Guide/AP P2P here. | MAVRK=For technical support on MAVRK please post your questions on The MAVRK Toolbox Forum. Please post only comments about the article WiLink8 Feature Guide/AP P2P here. | For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article WiLink8 Feature Guide/AP P2P here.
}} |
