Template:AkDcanSetup

Description

This template have DCAN connection details

Parameters

This template takes 1 parameter

• The Mnemonic that specifies SoC type. The existing Mnemnoics are
  • TI814X
  • AM335X

Example

To use this template simply add the following line to your wiki page. Change the mnemonic according to the desired SoC. This example is for the AM335x SoC.

{{AkDcanSetup|Am335x}}

Here's how it will look in your wiki page:

Setup Details

Connection details

Am335x

• DCAN interface is available on DB9 connectors on the daughter board. The DCAN pin details are as follows:

1. Pin 7 - CAN-H
2. Pin 2 - CAN-L
3. Pin 3 - Ground

• DB9F-DB9F straight cable for board-board connection is required and details can be found from digikey website & corresponding datasheet

• To connect two EVM's then the following connections needs to be made. Board A connecter pins 7,2,3 needs to be connected to pins 7,2,3 of Board B connector

Am335x-Am335x connection diagram