NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.

Talk:UBIFS Support

From Texas Instruments Wiki
Jump to: navigation, search
For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article UBIFS Support here.

Comments on UBIFS Support


Dmeixner said ...

In the "calculations" section, when calculating 'P', where does 200MiB come from? Assuming 2Gb flash, the equivalent is 256MiB.

--Dmeixner 15:28, 18 April 2012 (CDT)

Zlh said ...

Hi Dmeixner, I think 200MiB is the size of a partition.

--Zlh 22:45, 12 August 2012 (CDT)

Zlh said ...

It seems that ubifs is not very convenience to use if compared with jffs2 and yaffs2. Is there any way to check the volume of an image? Or, it's very hard to remember all the volumes of the images, if we'll use more than 1 image.

--Zlh 22:50, 12 August 2012 (CDT)

Pascal.bach said ...

Please add a section about the ECC selection when flashing via U-boot.


--Pascal.bach 07:57, 4 October 2012 (CDT)