NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
Talk:Multimedia Daughterboard for OMAP3EVM
For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article Multimedia Daughterboard for OMAP3EVM here.
While the above comments on the default I2C selection match with the schematic, the photo of the board in its highest resolution (although hard to tell because it's a GIF instead of a JPEG) indicate that for the Rev.B card R82 and R64 are populated to select I2C3. I assume this is now the default, as I2C3 is used to connect to the TVP5146 on the Rev.G EVM, which has the 5146 on the main board. Are there updated schematics for the Rev.B board that show the change? Should the above discussion show the differences?
--Cread 15:45, 14 January 2010 (CST)