NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
TRF3710
IQ de-modulator, TRF3710[edit]
In a closed-loop system, the downlink data sent to the air is then captured in the reception side. This is done by connecting the output of the TSW3003 (REFOUT, J32) to the input of the TRF3710 (RFIN, J6). These data are de-modulated and the can be found at J3 (I data) and J13 (Q data), which are sent to ADS5231 for data conversion. Regarding the local oscillator parameters for this device, its frequency can vary from 1700 to 2000 MHz. Since the local oscillator frequency for the IQ modulator is 2140 MHz, the local oscillator frequency for TRF3710 is generated to be the same value with the help of another TSW3003 kit.
|
{{
Please post only comments related to the article TRF3710 here. |
Keystone=
Please post only comments related to the article TRF3710 here. |
C2000=For technical support on the C2000 please post your questions on The C2000 Forum. Please post only comments about the article TRF3710 here. | DaVinci=For technical support on DaVincoplease post your questions on The DaVinci Forum. Please post only comments about the article TRF3710 here. | MSP430=For technical support on MSP430 please post your questions on The MSP430 Forum. Please post only comments about the article TRF3710 here. | OMAP35x=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article TRF3710 here. | OMAPL1=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article TRF3710 here. | MAVRK=For technical support on MAVRK please post your questions on The MAVRK Toolbox Forum. Please post only comments about the article TRF3710 here. | For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article TRF3710 here.
}} |
