NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
System Reset (Emulation)
- Some JTAG Connectors and emulators (such as the XDS560 revision D) support System Reset. When connected properly to a JTAG connector which supports it, the user can reset the target card from the debugger.
- When used with an XDS560 revision D cable pod, Code Composer Studio v4 can toggle the system reset pin on a suitable JTAG header such as the 20 pin Compact TI or 20 pin ARM connector.
- Note, as of CCSv4, Target-->Reset-->System Reset generates the system reset via ICEpick
|
{{
Please post only comments related to the article System Reset (Emulation) here. |
Keystone=
Please post only comments related to the article System Reset (Emulation) here. |
C2000=For technical support on the C2000 please post your questions on The C2000 Forum. Please post only comments about the article System Reset (Emulation) here. | DaVinci=For technical support on DaVincoplease post your questions on The DaVinci Forum. Please post only comments about the article System Reset (Emulation) here. | MSP430=For technical support on MSP430 please post your questions on The MSP430 Forum. Please post only comments about the article System Reset (Emulation) here. | OMAP35x=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article System Reset (Emulation) here. | OMAPL1=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article System Reset (Emulation) here. | MAVRK=For technical support on MAVRK please post your questions on The MAVRK Toolbox Forum. Please post only comments about the article System Reset (Emulation) here. | For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article System Reset (Emulation) here.
}} |
