Emulation Porting Kit

Useful Tip {{{Debug Server Scripting is recommended}}}

Overview

• TI 3rd parties provide XDS510™ and XDS560™ class emulators that support real-time JTAG scan-based emulation with product support across the complete line of TI devices. These emulators are tightly integrated with the Code Composer Studio IDE™ to make all of TI's real-time emulation control and visualization capabilities available to the developer. TI 3rd parties provide logic analyzers, hardware testing equipment, and a wide array of emulators that support different host I/O interfaces, including USB, Ethernet, PCI, parallel port, PCMCIA, and ISA bus.

• • Warning: Note that Emulation Porting Kits are no longer available to new partners.

Frequently Asked Questions

Q: Do I need an EPK for XDS100?

• A: No. XDS100 does not need an EPK. The schematic to build the design is at Xds100#How_to_make_an_XDS100_.2F_How_to_build_an_XDS100_hardware_emulator. Once built, the XDS100 will work with CCSv4, as USB drivers, and CCS drivers are included in the Code Composer Studio v4 installation.

Q: Do I need an EPK for XDS110?

• A: No. All of the required software for XDS110 is included with CCS. There is no additional software required from the vendor.

---