NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
Display DevPack User Guide
The Display(Watch) DevPack implements a 96x96 pixel display that connects to the SensorTag through the DevPack connector. It allows the SensorTag to be extended with display to be used a smart watch, weather station, fridge display, or for debugging to display data from the SensorTag.
The Display DevPack must be used with the SensorTag kit. Plug the Display DevPack into the SensorTag DevPack connector. The DevPack can be used with or without the plastic enclosure. The box also include an additional rubber sleeve to allow you to cut an opening for the display.
The display used with the Display DevPack is a Sharp LS013B4DN04,Datasheet
Please update to the latest iOS SensorTag application to do update your SensorTag with Display DevPack support.
Download the Display DevPack firmware[edit]
- Start the SensorTag app
- Press the power button on the SensorTag
- Choose Sensor view
- Choose FW Download
- Choose Select FW File
- Select the LCD DevPack FW' to download the correct firmware into the SensorTag
Note that if you have an old SensorTag firmware revision, you will first have to upgrade to the latest Factory image.
Plug the Display DevPack into the SensorTag[edit]
After downloading the firmware the SensorTag will reset and you will have to reconnect. First pull down to clear the device and connect to the SensorTag.
Enter text into the SensorTag app to display it on the LCD screen[edit]
You will now find the Display Service in the sensor view. You can enter text to write to the LCD display. You can also enable the built in clock and invert the text on the display.
Cut the rubber sleeve to fit your application[edit]
To cut the rubber sleeve to fit the display use a sharp knife and cut carefully around the edge of the display. Note that you should cut only around display itself and not the entire PCB.
You SensorTag Display DevPack is now ready to use[edit]
|
{{
Please post only comments related to the article Display DevPack User Guide here. |
Keystone=
Please post only comments related to the article Display DevPack User Guide here. |
C2000=For technical support on the C2000 please post your questions on The C2000 Forum. Please post only comments about the article Display DevPack User Guide here. | DaVinci=For technical support on DaVincoplease post your questions on The DaVinci Forum. Please post only comments about the article Display DevPack User Guide here. | MSP430=For technical support on MSP430 please post your questions on The MSP430 Forum. Please post only comments about the article Display DevPack User Guide here. | OMAP35x=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article Display DevPack User Guide here. | OMAPL1=For technical support on OMAP please post your questions on The OMAP Forum. Please post only comments about the article Display DevPack User Guide here. | MAVRK=For technical support on MAVRK please post your questions on The MAVRK Toolbox Forum. Please post only comments about the article Display DevPack User Guide here. | For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article Display DevPack User Guide here.
}} |
