NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
DRA7xx GLSDK 7.02.00.02 Post-release Updates
This page contains post-release updates to GLSDK 7.02.00.02 for DRA7xx
Post Release: Feature Additions[edit]
Feature | Description | Patch Details | Comments |
---|---|---|---|
FPDLink | Enable support for FPDLink displays | http://review.omapzoom.org/#/c/36535/ | This patch is still under review/rework. It will go through further revisions before integration into GLSDK 7.03 release. |
Post Release: Defect Fixes and the Patch Updates[edit]
Defect/ER ID | Description | Patch Details | Comments |
---|---|---|---|
OMAPS00326590 | In secure boot mode device tree(dtb) authentiation fails if the dtb file size is not 4 byte aligned. | secure: dra7x: non-aligned dtb size must be 4byte aligned for authentication | |
GLSDK-2389 | DRA7x: UBOOT: QSPI :cannot access more than 16MB of address space. | qspi: dra7x: enable 32-bit addressing for higher density flash device | |
GLSDK-2386 | VIP: Failed to capture from analog camera | v4l: of: Correct pclk-sample for BT656 bus arm: dtsi: jamr3: Use falling edge for embedded sync |
Fixed the V4L2 framework issue - backported a 4.2 mainline patch |
UART DMA | Fixes for some of the UART DMA issues | patch1 patch2 patch3 patch4 patch5 patch6 patch7 patch8 patch9 |
To use Serial 8250 UART with DMA, please enable "CONFIG_SERIAL_8250_DMA" |
Post Release: Known Issues and Limitations[edit]
None