DM646x Complementary Products

Introduction

This page serves as a repository of Complimentary Devices that can be paired with the DM646x SoC when integrating the device into a system. The Complementary Products listed here serve a wide range of functions such as:

• Providing basic support functions for the SoC (power, clocking, etc.)
• Expanding the interface options beyond the on-chip peripherals
• Creating the link between the digital domains on the SoC to the system's analog/physical domains

The Complementary Products are organized into functional categories, with the goal of showing several options and their respective Benefits.

Analog Video Input

The DM646x includes a 8-/16-bit digital video input port (VPIF) that can be interfaced with a video decoder, or ADC, to bring analog SD and HD video into the SoC. Before bringing the analog video into the ADC, it is also necessary to run it through an anti-aliasing filter to restrict the bandwidth before sampling. Below is a sample of SD/HD video decoders and anti-aliasing filters that would be a good match for the DM646x. Also view the Video and Imaging Solutions Guide and the presentation "The INs and OUTs of the TI Video Interfaces" (Media:Dm vpif inout v2.pdf) for a comprehensive selection of complementary video products.

Part Number	Description	Device Interface	Benefits
TVP7002	Triple 8/10-bit HD Video ADC	VPIF	Adds Analog HD Input Capabilities Built-in Horizontal PLL eliminates the need for an external clock source Requires a separate anti-aliasing filter
TVP5147M1	Dual 10-bit SD Video Decoder	VPIF	Adds Analog SD CVBS/S-Video/Component Input Capabilities Decodes YPbPr and NTSC/PAL/SECAM Input Formats Requires a separate anti-aliasing filter
THS7353	3-Channel Video Amplifier/Filter	VPIF	Integrated Anti-aliasing filter for Video ADCs Selectable SD/ED/HD Filter Cut-off Frequencies 0dB Gain and 2:1 MUX for connecting dual analog video sources
TVP5158	Four-Channel NTSC/PAL Video Decoders	VPIF	With Independent Scalers, Noise Reduction, Auto Contrast and Flexible Output Formatter for Security and Other Multi-Channel Video Applications

Analog Video Output

The DM646x includes a 8-/16-bit digital video output port (VPIF)that can be interfaced with a video encoder, or DAC, to deliver analog SD and HD video from the SoC. On the output of the ADC, it is also necessary to take the analog video through an amplifier and reconstruction filter to achieve the correct gain and remove the high-frequency images of the signal. Below is a sample of SD/HD video DACs, amplifiers, and reconstruction filters that would be a good match for the DM646x. Also view the Video and Imaging Solutions Guide and the presentation "The INs and OUTs of the TI Video Interfaces" (Media:Dm vpif inout v2.ppt) for a comprehensive selection of complementary video products.

Part Number	Description	Device Interface	Benefits
THS8200	Triple 11-Bit HD Video DAC	VPIF	Adds Analog HD Output Capabilities 2x Oversampling Filter allows for inexpensive external analog reconstruction filters Requires a separate 6dB amplifier and filter Includes an ITU-R.BT656 output port to connect to an NTSC/PAL video encoder
ADV7171	Digital PAL/NTSC Video Encoder	VPIF	Adds Analog SD Output Capabilities High Quality 10-Bit Video DACs
THS7316	3-Channel HDTV Video Amplifier	VPIF	For use on the output of an HD Video DAC Includes 36MHz 5th-Order Integrated Filters and 6dB Gain Pairs well with the THS8200 Video DAC for an HD-only solution
THS7303	3-Channel SD/ED/HDTV Video Amplifier	VPIF	For use on the output of an SD, ED, or HD Video DAC Includes 2:1 mux for interfacing to two separate encoders (eg. One HD and one SD DAC) Includes Selectable 9-/16-/35-/190-MHz 5th-Order Integrated Filters and 6dB Gain

HDMI

HDMI transmitters and receivers can be used to bring digital audio/video into the DM646x via the Video Port Interface (VPIF) and Multi-channel Audio Serial Port (McASP). When integrating an HDMI transmitter/receiver, it is also recommended to use and ESD protection device near the connector to enhance the system-level ESD protection. Below is a sample of HDMI products that would complement the DM646x. Also view This App Note and the presentation "The INs and OUTs of the TI Video Interfaces" (Media:Dm vpif inout v2.ppt) for more details on interfacing HDMI transmitters/receivers to DM646x.

Part Number	Description	Device Interface	Benefits
SiI9134	HDMI 1.3 Transmitter	VPIF McASP	Adds HDMI Transmit Capabilities Built-in High-bandwidth Digital Content Protection (HDCP) encryption engine
SiI9125	HDMI 1.3 Receiver	VPIF McASP	Adds HDMI Receive Capabilities Integrated HDCP Cipher Engine
TPD12S521	HDMI Transmitter Port Protection and Interface Device	HDMI Transmitter	Adds ESD protection on an HDMI Transmit Connector ±8-kV Contact ESD Protection on External Lines Supports HDMI 1.3 Data Rate
TPD12S520	HDMI Receiver Port Protection and Interface Device	HDMI Receiver	Adds ESD protection on an HDMI Receive Connector ±8-kV Contact ESD Protection on External Lines Supports HDMI 1.3 Data Rate

Audio Input/Output

The DM646x includes a four-serializer Multi-channel Audio Serial Port (McASP) for interfacing to audio Codecs, ADCs, DACs, Digital Power Amplifiers, and more. In addition, the DM646x includes a second single-serializer McASP for outputting S/PDIF. The McASP1 output can directly source a coax S/PDIF output and can be connected to a fiber optic transmitting module to produce an optical S/PDIF output. Below is a sampling of audio Codecs, ADCs, DACs, Amps, and S/PDIF components that would be a good match for the DM646x. Also view the Audio Guide for a comprehensive selection of complementary audio products.

Part Number	Description	Device Interface	Benefits
TLV320AIC32	Low-Power Stereo CODEC	McASP0	Adds Analog Audio Input and Output Capabilities Six Stereo Single-Ended Inputs Six Audio Output Drivers (Stereo speaker, headphone, and line) 3D/Bass/Treble/EQ/De-Emphasis Effects
PCM1754	106dB SNR Stereo DAC	McASP0	Adds Analog Stereo Audio Output Capabilities 24-bit, 106 dB Dynamic Range, and 0.002% THD+N (Typical) Includes Antialiasing Filter
PCM1802	105dB SNR Stereo ADC	McASP0	Adds Analog Stereo Audio Input Capabilities 24-bit, 105 dB Dynamic Range, and 96 dB THD+N (Typical)
TAS5710	20-W Stereo Closed-loop I2S Audio Amplifier	McASP0	Adds 20W Speaker Driving Capabilities EQ: Speaker Equalization for Better Sound 2-Band DRC: Improved Bass Performance, Enables Speaker Protection and Nightmode Listening
TOTX141P	Fiber Optic Transmitting Module	McASP1	Adds Fiber Optic Digital Audio Output Capabilities Conforms to JEITA Standard CP−1201

RS-232

The DM646x UART peripherals can be used to implement a RS-232 interface when paired with the appropriate line driver/receiver. All three UARTs on the DM646x support transmit/receive and flow control features, but only UART0 is capable is supporting modem control capabilities. Below is a sampling of RS-232 products with varying numbers of drivers/receivers to support the desired RS-232 capabilities.

Part Number	Description	Device Interface	Benefits
TRS3243E	Multichannel RS-232 Line Driver/Receiver	UART0	Adds RS-232 with Hardware Flow-Control and Modem Control Capabilities Operates up to 500 Kbit/s ±15-kV HBM and IEC 61000-4-2 Air-Gap Discharge, ±8-kV IEC 61000-4-2 Contact Discharge
TRSF3232E	Two-Channel RS-232 Driver/Receiver	UART0/1/2	Adds RS-232 with Hardware Flow-Control Capabilities Operates up to 1 Mbit/s ±15-kV HBM and IEC 61000-4-2 Air-Gap Discharge, ±8-kV IEC 61000-4-2 Contact Discharge
TRSF3221E	Single-Channel RS-232 Driver/Receiver	UART0/1/2	Adds RS-232 (without flow control) Capabilities Operates up to 1 Mbit/s ±15-kV HBM and IEC 61000-4-2 Air-Gap Discharge, ±8-kV IEC 61000-4-2 Contact Discharge

1394

The DM646x Asynchronous EMIF or PCI peripheral can be used to implement a 1394 interface when paired with a 1394 link layer and integrated physical layer device. Below is a sampling of 1394 products that would complement the DM646x.

Part Number	Description	Device Interface	Benefits
TSB43EA43	Integrated 1394a Phy and Link	EMIFA or PCI	Adds 1394 Capabilities Support transmit and receive of up to two MPEG2 transport streams with encryption and decryption Includes hardware acceleration for content key generation

USB

The DM646x includes a USB 2.0 Port with an Integrated PHY. This port can function as a High-/Full-Speed Clientor a High-/Full-/Low-Speed Mini-Host (Supporting One External Device). An addition USB 2.0 port can be added to the system by interfacing an external USB Bridge Controller to the DM646x VLYNQ bus. Below is a sample USB Bridge Controller that would complement the DM646x.

Part Number	Description	Device Interface	Benefits
TUSB6020	USB 2.0 High-Speed On-the-Go Local Bus Interface Bridge Controller	VLYNQ	Adds a second USB 2.0 Port Configurable for up to 4 Transmit Endpoints or up to 4 Receive Endpoints Supports OTG Communications

PCI and PCI Express

The DM646x includes a 32-bit, 33MHz PCI peripheral that conforms to PCI Specification 2.3 and can operate as both a master and slave interface. Adding a PCI-to-PCI Bridge on this interface can allow transactions to occur between masters on one PCI bus and targets on another PCI bus. In addition, a bridge can be used to overcome the electrical loading limits of 10 devices per PCI bus and one PCI device per expansion slot by creating hierarchical buses.

The DM646x SoC can also be integrated into a PCI Express (PCIe) system when used in conjunction with a PCI-to-PCIe Bridge. Below is a sample PCI-to-PCI Bridge and PCI-to-PCIe Bridge that would complement the DM646x.

Part Number	Description	Device Interface	Benefits
PCI2250	32-Bit, 33 MHz PCI-to-PCI Bridge	PCI	Adds flexibility to the PCI bus system architecture Compatible with 3.3-V and 5-V PCI signaling environments Supports up to four secondary bus masters
XIO2001	x1 PCI Express to PCI Bus Translation Bridge	PCI	Adds PCI Express Capabilities Fully compliant to the PCI Express Base Specification, Revision 2.0 and PCI Local Bus Specification (Revision 2.3)

Clocking

The DM646x requires both a 27MHz main clock and a 24MHz USB clock. While crystals can be paired with the internal oscillators to provide these clocks, an external clock generator/synthesizer can sometime be more cost effective. Clock generators/synthesizers can use a single crystal to produce many clock output frequencies using their internal PLLs. Not only can they source both the 27MHz main clock and 24MHz USB clock for DM646x, they can also provide the clock for other devices in the system such as the audio and video encoders/decoders. Below is a sampling of clock generators/synthesizersthat would complement the DM646x. Also view the Clocks and Timing Selection Guide for a comprehensive guide to clocking solutions from TI.

Part Number	Description	Device Interface	Benefits
CDCEL925	Programmable 2-PLL VCXO Clock Synthesizer	Clock Input	Provides DM646x Clocks and more 2 Internal PLLs and 5 1.8-V LVCMOS Outputs up to 160MHz On-Chip VCXO with a Pull Range of ±150 ppm

Power

The DM646x requires regulated Core, 1.8V, and 3.3V voltages, sequenced in a low-to-high order. When selecting voltage regulators to pair with DM646x, TI provides a TMS320DM6467 Power Consumption Summary to help size the regulators for the worst case power of the system. In addition, TI provides a DM6467 Power Management Website with power reference designs using DCDC Controllers and Power Modules. Below is a sampling of the power management products that complement the DM646x. Also view the app note Enabling SmartReflex on the TMS320DM6467 for reference designs utilizing the power saving SmartReflex(TM) feature of DM646x.

Part Number	Description	Device Interface	Benefits
PTH08T230W	6-A, 4.5V to 14V Input, Non-Isolated, Wide Output Adjustable Power Module	Power Pins	Provides DM646x Core Voltage TurboTrans™ and SmartSync Technologies
TPS40193	4.5V to 18V Input, Low Pin Count Synchronous Buck Controller	Power Pins	Provides DM646x Core Voltage Up to 20-A Output Current Power Good output to simplify sequencing
PTH08000W	2.25-A, 5/12-V Input, Non-Isolated Wide Adjust Module w/ Auto-Track	Power Pins	Provides DM646x 3.3V Voltage Up to 2.25-A Output Current Efficiencies Up to 94%
TPS75618	Single Output LDO, 5.0A, Fixed(1.8V)	Power Pins	Provides DM646x 1.8V Voltage 3% Tolerance Thermal Shutdown Protection