NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
Category:EPWM and HRPWM for C2000
Introduction[edit]
This category shows pages related to the ePWM and HRPWM on C28x processors.
The enhanced pulse width modulator (ePWM) peripheral controls many of the power-related systems found in both commercial and industrial equipments. The main systems include digital motor control, switch mode power supply control, uninterruptible power supplies (UPS), and other forms of power conversion. The PWM peripheral performs a DAC function, where the duty cycle is equivalent to a DAC analog value; it is sometimes referred to as a Power DAC.
The HRPWM module extends the time resolution capabilities of the conventionally derived digital pulse width modulator (ePWM). HRPWM is typically used when PWM resolution falls below ~ 9-10 bits.
Electrical Specifications[edit]
Electrical specifications can change between devices, peripheral types and device families. Always refer to the data manual and errata for a particular device for Electrical Specifications.
This page is obsolete and no longer maintained. Refer to C2000 Real-Time Control Peripherals Reference Guide (spru566m) for peripheral type information.
Pages in category "EPWM and HRPWM for C2000"
The following 3 pages are in this category, out of 3 total.
