NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
CC3100 & CC3200 XDS100v2 on IAR
Instruduction[edit]
This page explain how to use XDS100V2 with CC32XX on IAR.
General Setup[edit]
Target Connection[edit]
XDS100v2 Pin (TI 20 Pin connector) | Target Pin |
---|---|
1 | TMS |
3 | TDI |
4 | GND |
5 | VCC (3.3 V) |
7 | TDO |
11 | TCK |
20 | GND |
Note : The above pin mapping is based on TI 20 pin connector. Please refer pin layout of XDS adapter that you are using, if it's not TI 20 pin connector.
On IAR[edit]
- Select Options->Debugger->Driver->XDS100/200/ICDI (drop-down)
- Go to XDS100/200/ICDI (shown below)
- Select the board file
- Make sure “TI emulation package installation path” points to “ccs_base” folder
Board file[edit]
Links[edit]
{{#invoke: Navbox | navbox }}