Analog and Power for DM368

Introduction

This page serves as a repository of complimentary devices that can be paired with the DM368 SoC devices when integrating the device into a system. The complementary products listed here serve a wide range of functions such as:

• Providing basic support functions for the SoC (power, clocking, etc.)
• Expanding the interface options beyond the on-chip peripherals
• Creating the link between the digital domains on the SoC to the system's analog/physical domains

The complementary products are organized into functional categories, with the goal of showing several options and their respective benefits.

Analog Video Input/Output

Also view the Video and Imaging Solutions Guide for a comprehensive selection of complementary video products.

Part Number	Description	Device Interface	Details
TVP5151	Ultra-Low Power NTSC/PAL/SECAM Video Decoder	VPIF	Accepts NTSC/PAL/SECAM video data ITU-R BT.601 standard sampling 8-bit 4:2:2 or 8-bit ITU-R BT.656 output format Two composite inputs or one S-video input Programmable gain amplifier and automatic gain control circuit Ultralow power consumption: 138mW Power-down mode: <1mW Supports different VBI modes (see device data sheet)
VSP01M01	10-Bit, 36 MSPS 1-Channel AFE for CCD Sensors with prog. TG and VD		CCD Signal Processing: 36-MHz Correlated Double Sampling (CDS) 16-Bit Analog-to Digital Conversion: 36-MHz Conversion Rate No Missing Codes Ensured 80-dB Input-Referred SNR (at 12-dB Gain) Programmable Black Level Clamping Programmable Gain Amplifier (PGA) Integrated Timing Generator
VSP2582	12-bit, 36 MSPS 1-Channel AFE for CCD Sensors		CCD Signal Processing: 36-MHz Correlated Double Sampling (CDS) 12-Bit Analog-to-Digital Conversion: 36-MHz Conversion Rate No Missing Codes Ensured 78-dB Input-referred SNR (at CDS Gain 0 dB) Programmable Black Level Clamping Programmable Gain Amp (PGA) Portable Operation: Low Voltage: 2.7 V to 3.6 V Low Power: 85 mW at 3.0 V and 36 MHz, 1 mW in Standby Mode
THS7303	3-Channel Low Power Video Amplifier/I2C Control/Filter		3 Video Amplifiers for CVBS, S-Video, Y’U’V 2V/V Gain (6dB)
THS7375	4-Channel SDTV Video Amplifier/Filter		4 SDTV Video Amplifiers for CVBS, S-Video, Y’U’V 5.6V/V Gain (14.95dB)
THS7315	3-Channel SDTV Video Amplifier/Filter		3 SDTV Video Amplifiers for CVBS, S-Video, Y’U’V 5.2V/V Gain (14.3dB)
OPA361	3V Video Amplifier with Internal Gain and Filter		Rail-to-Rail Output 2-Pole Reconstruction Filter Integrated Level Shifter Low Quiescent Current: 5.3 mA Shutdown Current: 1.5uA Input Range Includes Ground – DC-Coupled Input

Audio Input/Output

Also view the Audio Guide for a comprehensive selection of complementary audio products.

Part Number	Description	Compatible Part Numbers	Device Interface	Details
TLV320AIC3107	Low Power Stereo CODEC with Integrated Mono Class-D Amplifier	TLV320AIC3007	McASP/McBSP	Stereo CODEC with Integrated MONO Class-D Amp Audio ADC + Audio DAC Seven Audio Input Pins
TLV320AIC3254	Low Power Stereo Audio Codec	TLV320AIC3204	McASP/McBSP	4.1 mW Stereo 48ksps DAC Playback 6.1 mW Stereo 48 ksps ADC Record Low Power Bypass
TLV320AIC3110	Low-Power Audio CODEC with 1.3W Stereo Class-D Speaker Amplifier	TLV320AIC3100 TLV310AIC3111 TLV310AIC3120	McASP/McBSP	Stereo Audio DAC: 95-dBA Signal-to-Noise Ratio Stereo Audio ADC: 91-dBA Signal-to-Noise Ratio 1 Differential and 3 Single-Ended Inputs With Mixing and Level Controls 1.29-W Stereo Class-D BLT-Ω Speaker Driver Automatic Gain Control (AGC) for Record
TPA2013D1	2.7-W Constant Output Power Mono Class-D Audio Amplifier with Integrated Boost Converter			Constant Output Power 1.8-V to 5.5-V Operation 2.2-W into an 8-Ω Load from a 3.6-V Supply
TPA2010D1	2.5-W Mono Class-D Audio Amplifier with Variable Gain			2.5-W MONO Filter Free Class-D Efficiency: 88% at 400mW, 80% at 100mW Only three external components
TPA2011D1	3.2-W Mono Class-D with Auto-Recovering Short-Circuit Protection			3.2-W MONO Class-D 1.5-mA Quiescent Current 20uV Low Output Noise

RS-232

Part Number	Description	Device Interface	Benefits
TRSF3232E	Two-Channel RS-232 Driver/Receiver	UART0/1/2	Adds RS-232 (with modem control) Capabilities Operates up to 1 Mbit/s ±15-kV HBM ±15-kV IEC 61000-4-2 Air-Gap Discharge ±8-kV IEC 61000-4-2 Contact Discharge Dual-channel
TRSF3221E	Single-Channel RS-232 Driver/Receiver	UART0/1/2	Adds RS-232 (without modem control) Capabilities Operates up to 1 Mbit/s ±15-kV HBM ±15-kV IEC 61000-4-2 Air-Gap Discharge ±8-kV IEC 61000-4-2 Contact Discharge Single-channel

Miscellaneous

Part Number	Description	Compatible Part Numbers	Device Interface	Details
TSC2006	Nano-Power Touch Screen Controller with SPI Serial Interface		SPI	1.2V to 3.6V, 12-Bit, Nanopower, 4-Wire TOUCH SCREEN CONTROLLER with SPI Low Power: 43uW 1.2V, 8.2k SPS Eq Rate
TSC2008	Touch Screen Interface		SPI	1.2V to 3.6V, 12-Bit, Nanopower, 4-Wire Micro TOUCH SCREEN CONTROLLER with SPI Effective Throughput Rate: Up to 20kHz (8-Bit) or 10kHz (12-Bit) Low Power (12-Bit, 8.2kHz Eq Rate): 30.4mA at 1.2V, fSCLK = 5MHz 44.6mA at 2.7V, fSCLK = 10MHz 1.5 x 2 WCSP-12 and 4 x 4 QFN-16 Packages
CC2500	Low Cost, Low-Power 2.4 GHz RF Transceiver Designed for Low-Power Wireless Apps in the 2.4 GHz ISM B		SPI	RF Performance High sensitivity (-104 dBm at 2.4 kBaud, 1% packet error rate) Low current consumption (13.3 mA in RX, 250 kBaud, input well above sensitivity limit) Programmable output power up to +1 dBm OOK, 2-FSK, GFSK, and MSK supported Digital RSSI output Programmable channel filter bandwidth
TMP112	High-Precision, Low-Power, Digital Temperature Sensor		I2C	Accuracy: 0.5°C (0°C to +65°C) Low Quiescent Current – 10 uA (MAX) 1 uA (MAX) Shutdown Current Accuracy: 0.5°C (0°C to +65°C); 1.0°C (–40°C to +125°C)
TMP102	Low-power Digital Temperature Sensor		I2C	Low Quiescent Current - 10 uA (MAX) 12-bit Resolution 10 uA (MAX) Shutdown Current Supply Range: 1.4V to 3.6V Accuracy: 0.5°C (–25°C to +85°C)
TCA8418	Keypad Scan with Integrated ESD Protection		I2C	QWERTY keyboard operation plus GPIO expansion 8x10 kepad array supported (80 buttons) Integrated ESD protection Stanby current: 3uA 1.65V to 3.6V operating supply voltage
TCA6424	Low-Voltage 24 Bit I2C and SMBus I/O Expander		I2C	24-bit I/O Expander No Glitch on Power Up 5-V Tolerant I/O Ports Interrupt Output Reset and Config Register
TCA6416A	Low-Voltage 16 Bit I2C and SMBus I/O Expander		I2C	16-bit I/O Expander Internal Power-On Reset Noise Filter on SCL/SDA Inputs
TCA6408A	Low-Voltage 16 Bit I2C and SMBus I/O Expander		I2C	8-bit I/O Expander Low Standby Current Consumption of 1 uA
TPD4E002	Quad Low-Capacitance Array With +/-15-kV ESD Protection		ESD/EMI	4-Channel ESD Protection Low 11-pF Input Capacitance
TSB43EA42	Integrated 1394a Phy and Link for Consumer Electronics	TSB43EB42 TSB43EC42	1394	Integrated 400/200/100 Mbps 2-port/3-port PHY 2 x 4K-byte Isochronous Buffers for Video Data DTCP and AES Encryption Support for MPEG-DVB and DSS SRAM-like 16-bit Asynchronous Interface Two Configurable High-Speed Data Ports for Video Data Higher Asynchronous Throughput With DMA Hardware Enhancement

Clocking

Below is a sampling of clock generators/synthesizers that would complement DM368 devices. Also view the Clocks and Timing Selection Guide for a comprehensive guide to clocking solutions from TI.

Part Number	Description	Device Interface	Details
CDCM7005	3.3-V High Performance Clock Synchronizer and Jitter Cleaner		High Performance LVPECL and LVCMOS PLL Clock Synchronizer. LVCMOS input frequencies up to 200MHz. VCXO_IN clock synchronized to one of two reference clocks. Up to 10 LVCMOS outputs and 5 differential LVPECL outputs. VCXO_IN frequencies up to 2GHz.
CDCV304	200-MHz General Purpose Clock Buffer		Operating frequency: 0 to 200MHz. Distributes one clock input to one bank of four outputs. Operates from single 3.3V or 2.5V supply.
CDCM61004	1:4 Ultra Low Jitter Crystal-In Clock Generator		Single-ended or crystal reference input. Input frequency range: 21.875 to 28.47MHz. Supports multiple common LVCMOS output frequencies (62.5 to 250MHz).