NOTICE: The Processors Wiki will End-of-Life on January 15, 2021. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.
AM3335x Wireless Connectivity Hardware installation guide
Board Bringup[edit]
After opening the box, verify its contents (including an SD card, etc.). Then proceed with the hardware assembly steps described below.
WL1271 COM (Connectivity On a Module) installation[edit]
Please make sure the WL1271 COM module is installed in the COM connector located on the base board next to the SD card slot as shown in the picture below
For more information...[edit]
Note: In case the SD card is not available, it can be prepared according to the process described in: <AM335x Preparing an SD Card>.
For more information about U-Boot environment variables and using them in run command, refer to: U-Boot manual
For more information on Booting Linux kernel, refer to: Booting Linux kernel