CC256x Getting started guide

Getting started guide

This page explains hardware and software for getting started with CC256x + Bluetopia.

CC256x hardware

Make	Module	TI SI	Functions	HW Support
Panasonic	PAN1315A/PAN1325A	CC2560A	BT	NRND
Panasonic	PAN1315B/PAN1325B	CC2560B	BT	NRND
Panasonic	PAN1317/PAN1323/PAN1327	CC2564	BT+BLE	NRND
Panasonic	PAN1316/PAN1326	CC2564	BT+BLE	Active
Panasonic	PAN1316B/PAN1326B	CC2564B	BT+BLE	Active
TI	CC2564MODN	CC2564B	BT+BLE	Active
LSR	450-0104	CC2564	BT+BLE	Active
LSR	450-0104B	CC2564B	BT+BLE	Active
Murata	LBMA1BGUG2	CC2564	BT+BLE	Active

Host processors

MCU Family	MCU Core	MCU Board	HW Support	Link	SW Support	SW Support - Internal Version
MSP430™	16-bit Microcontroller	MSP-EXP430F5438 Experimenter Board	Active	http://www.ti.com/tool/msp-exp430f5438	v 1.4 R1	TI_Bluetopia_4_0_1_8_MSP430_R1.zip
MSP430™	16-bit Microcontroller	MSP-EXP430F5529 Experimenter Board	Active	http://www.ti.com/tool/msp-exp430f5529	v 1.4 R1	TI_Bluetopia_4_0_1_8_MSP430_R1.zip
MSP430™	16-bit Microcontroller	MSP-EXP430F5529LP LaunchPad	Active	http://www.ti.com/tool/msp-exp430f5529lp	Roadmap	Roadmap
MSP430™	16-bit Microcontroller	EZ430-RF256x Evaluation Kit	Active	http://www.ti.com/tool/ez430-rf256x	v 1.4 R1	TI_Bluetopia_4_0_1_8_MSP430_R1.zip
MSP430™	16-bit Microcontroller	BT-MSPAUDSINK Evaluation Board	Active	http://www.ti.com/tool/bt-mspaudsink	v 1.4 R1	TI_Bluetopia_4_0_1_8_MSP430_R1.zip
MSP430™	16-bit Microcontroller	BT-MSPAUDSOURCE Evaluation Board	Preview	TBA -	Roadmap	Roadmap
Stellaris®	32-bit ARM® Cortex™-M4	DK-LM3S9B96 Development Board	Obsolete (Replaced by DK-LM3S9D96)	http://www.ti.com/tool/dk-lm3s9b96	v 1.0	TI_Bluetopia_4_0_1_2_Stellaris_M3_M4.zip
Stellaris®	32-bit ARM® Cortex™-M4	DK-LM3S9D96 Development Board	Not Recommended for New Designs	http://www.ti.com/tool/dk-lm3s9d96	v 1.0	TI_Bluetopia_4_0_1_2_Stellaris_M3_M4.zip
Stellaris®	32-bit ARM® Cortex™-M4	EKS-LM4F232 DevelopmentBoard	Obsolete (Replaced by DK-TM4C123G)	http://www.ti.com/tool/ek-lm4f232	v 1.0	TI_Bluetopia_4_0_1_2_Stellaris_M3_M4.zip
Tiva™ C Series	32-bit ARM® Cortex™-M4	DK-TM4C123G Development Board	Active	http://www.ti.com/tool/dk-tm4c123g	v 1.1	TI_Bluetopia_4_0_1_3_Tiva_M4.zip
Tiva™ C Series	32-bit ARM® Cortex™-M4	EK-TM4C123GXL LaunchPad	Active	http://www.ti.com/tool/ek-tm4c123gxl	Roadmap	Roadmap
Tiva™ C Series	32-bit ARM® Cortex™-M4	DK-TM4C129X Development Board	Active	http://www.ti.com/tool/dk-tm4c129x	v 1.1	TI_Bluetopia_4_0_1_3_Tiva_M4.zip

Hardware Setup

Please see the below link on how to connect to hardware in here.

Please make sure you are not missing the first three step from the link if you are using a different Host processors.

NOTE: This is just a draft, to see if this is what is expected.

Software

you can get the software from here

To see what is supported on what and for a step by step demonstration on how to run this application visit Wiki.

You can follow the Hardware Porting Guide provided as part of the V1.4 R1 SDK documentation folder for porting to any other Host processer

Flash Emulation Tool (FET) Overview

For downloading the sample demo to the EVM, you require MSP430 USB Debugging Interface. This needs to be purchased separately.

NOTE: This is not required if you are using EZ430-RF256x. But jut keep in mind that is is Not Recommended for New Designs

	Audio sink board	MSP430F5438A	EZ430-RF256x
Supported by CCS	YES	YES	YES
Supported by IAR	YES	YES	YES
FETPRO430	YES	YES

You need to connect the FET USB Debugging Interface to JTAG debugging port(J2) and you need to connect the USB of FET USB Debugging Interface to the PC.

And the detailed flashing procedure is mentioned here